| |
NEW
70 WATT ON-BOARD POWER SUPPLIES
(Directly attaches to Sony®
or Anton/Bauer®
Mounts) |
![](images/RPS70_2.JPG)
RPS-70 (shown on-camera) |
|
![](images/RPS70Vback_wCam.JPG)
RPS-70V (rear view) |
![](images/RPS70back_wCam.JPG)
RPS-70 (rear view) |
Frezzi answers the needs of broadcast professionals looking for a powerful
AC power supply that is compact, lightweight, noise free, and versatile.
The new Frezzi RPS-70 and RPS-70V power supplies answer these needs.
For on-board power, the RPS-70 connects to all Anton/Bauer®
brackets, while the RPS-70V connects to all Sony®
V-mounts. Both units may be used off the camera and provide power via
a built-in XLR-4(F) connector. The RPS-70V also contains a built-in
2-pin power-tap receptacle to power an on-board light or other auxiliary
equipment. Both supplies weigh less than 2 pounds and provide 70 watts
of noise free operation. That's enough to run a camera and on-board
light.
![bullet](_themes/fpsblue1/dot1.gif) | Mounts directly to Sony®
(Model# RPS-70V) or Anton/Bauer®
(Model# RPS-70) brackets |
![bullet](_themes/fpsblue1/dot1.gif) | XLR-4(F) connector for other cameras or other
equipment |
![bullet](_themes/fpsblue1/dot1.gif) | May be used on or off camera |
![bullet](_themes/fpsblue1/dot1.gif) | Rugged, compact, and lightweight aluminum
construction |
![bullet](_themes/fpsblue1/dot1.gif) | Quiet, noise free operation |
![bullet](_themes/fpsblue1/dot1.gif) | Operates from any AC mains worldwide |
Specifications
DC Output: 14.4V @ 5 amps. AC Input:
90-260 VAC, 50-60HZ
Size: 5.5 x 4.5 x 2.75 (RPS-70V), 5.5 x 4.4 x 2.5 (RPS-70)
Weight: 1.75 lbs. (RPS-70V), 1.25 lbs. (RPS-70)
For Sony® V-Lock
mounts order: Item#
95103, Model# RPS-70V
For Anton/Bauer® mounts order: Item# 95104, Model# RPS-70
|
|